I have a desktop with the Intel Z370 chipset and I am trying to use the Intel X520-SR2 NIC with it. For some reason, the machine is not booting past the initial logo screen. I have tried pressing F2 or F12 to access BIOS settings, but it is completely frozen.
I am attempting to do PXE boot in legacy mode.
I have tried the following steps:
Verified the NIC’s Brady ID to confirm it is Intel genuine
Updated the BIOS on the machine to the most current
Updated the NIC using bootutil and set it to PXE boot
Reseated the NIC and verified the PCI slot in the machine works as expected
Changed the NIC to use combo mode while enabling PXE boot (i.e. pre-boot images)
I have tested the NIC on a totally different computer and confirmed it worked as expected. This issue seems to be unique to the machine with the Z370 chipset.
This is just a follow up for the information we requested so we can proceed checking your query. In case you have questions or clarifications, feel free to let us know.
Awaiting to your reply.
We will follow up after 3 business days in case we don’t hear from you.
We’ve tried looking for 1PCFL-SC/R with Z370 chipset and unfortunately, we were not able to identify its specific brand and manufacturer as we’re getting multiple results.
Since the card worked as expected on a different computer, we highly suggest checking with your board manufacturer if the X520-SR2 is compatible with your motherboard. The compatibility of the card would be based on the motherboard and your motherboard’s manufacturer is responsible for checking and testing the validated components for their own system.
Please visit this link for the list of System Manufacturers.
This is just a follow up to check if you have read our previous reply and if you need additional assistance on this request. If yes, please let us know so we can further check on it. Otherwise, kindly advise if we can proceed closing this thread.
Awaiting to hear from you soon.
Should there be no response from you, I’ll make sure to reach out after 3 business days.
Please be informed that we will now close this request since we haven’t received any response from our previous follow ups. Just feel free to post a new question if you may have any other inquiry in the future as this thread will no longer be monitored.